Skip to content
Home » Blog » Circle Measurements: Radius, Circumference and Area Worksheet

Circle Measurements: Radius, Circumference and Area Worksheet

An orange circle with a central diameter line and curved boundary arrow sits beside a calculator.

A circle with radius 12.5 cm has a circumference of about 78.54 cm and an area of about 490.87 cm². Use C = 2πr for the distance around the edge and A = πr² for the surface inside it. If you know a circumference of 100 cm instead, the diameter is 100 ÷ π, about 31.83 cm.

This worksheet shows how to reproduce those three results in the CheckMatter Scientific Calculator. The measurements are hypothetical and describe an ideal, flat circle. They are not measurements of a particular product or a manufacturing specification.

Radius, diameter, circumference and area answer different questions

The radius runs from the centre to the edge. The diameter runs from one edge through the centre to the opposite edge, so d = 2r. Circumference measures the boundary, while area measures the two-dimensional region inside. OpenStax’s circle geometry reference explains these relationships.

  • From radius to circumference: C = 2 × π × r.
  • From radius to area: A = π × r × r.
  • From circumference to diameter: d = C ÷ π.

Label the known quantity before choosing a formula. A number described as “across the circle” may be a diameter; it should not automatically be entered as a radius.

Example: radius 12.5 cm

Suppose a circular drawing has a labelled radius of 12.5 cm. Its circumference is 2 × π × 12.5 = 25π cm, approximately 78.5398163397 cm. Rounded to two decimal places, report 78.54 cm.

The same circle’s area is π × 12.5 × 12.5 = 156.25π cm², approximately 490.873852123 cm². Rounded to two decimal places, report 490.87 cm².

The area is not another way to report the circumference. The first result is a length; the second is a square-unit quantity. For a practical measurement record, write both the number and the unit rather than a bare calculator result.

Example: diameter from a 100 cm circumference

For a different ideal circle, suppose the measured boundary is 100 cm and you need its diameter. Rearrange C = πd:

d = 100 ÷ π = 31.8309886184… cm, or 31.83 cm to two decimal places.

Keep the unrounded value for a backward check: multiplying 100/π by π returns 100 cm. Multiplying the rounded 31.83 cm instead will produce a small rounding difference. It does not mean that the inverse formula is inconsistent.

Reproduce the three calculator entries

Press AC before each row. Enter the numbers and operators using the keypad, press the calculator’s π key wherever shown, then press =. Use the decimal-point key for 12.5. There is no need to change DEG/RAD for these arithmetic-only calculations.

Question Keypad expression Displayed result Report to 2 decimal places
Circumference, r = 12.5 cm 2 × π × 12.5 78.5398163397 78.54 cm
Area, r = 12.5 cm π × 12.5 × 12.5 490.873852123 490.87 cm²
Diameter, C = 100 cm 100 ÷ π 31.8309886184 31.83 cm

The π key supplies more digits than typing 3.14. Keep that value through the calculation and round the final result. The Scientific Calculator function guide explains the other controls.

Checks that catch common measurement errors

  • Confirm radius versus diameter. Using the diameter in a radius formula doubles the circumference result and makes the area result four times as large.
  • Use one length unit. Convert inputs consistently before calculating. The Unit Converter can help with length conversions.
  • Separate length from area. Centimetres belong on circumference or diameter results; square centimetres belong on area results.
  • Do not add false precision. A long display does not make the original measurement more accurate. Two decimal places here demonstrate rounding, not a guaranteed measurement tolerance.
  • Check the shape and boundary. These formulas describe a circle. An oval, irregular object or measurement around a thick rim may require a different model or a clear choice of inner versus outer boundary.

Keep a short record of the known quantity, its unit, the formula, the unrounded calculator result and the final rounding. For rectangular rather than circular measurements, see the rectangle diagonal worksheet.

This educational calculation does not include waste, overlap, clearance or fabrication allowances. Use verified dimensions and suitable professional checks for precision-critical work.

Checked 20 November 2026: all three worksheet expressions were tested in the live CheckMatter calculator and checked independently. Written and maintained by Ajit Naskar. Read our editorial policy; independent professional review is not claimed.