Skip to content
Home » Blog » Combined Work Rates: Calculate Finish Time When a Helper Starts Late

Combined Work Rates: Calculate Finish Time When a Helper Starts Late

Two orange workstations combine their output beside a clock, illustrating parallel work rates.
Convert each solo completion time into a share of the job completed per hour.

To combine two work rates, add the fractions of the job they complete per hour, then divide the work remaining by that total rate. If one person can finish a batch in 6 hours and another in 9 hours, working together from the start takes 3 hours 36 minutes. If the second person joins after the first has worked alone for 1 hour, the batch finishes 4 hours after the first person started, under the steady-rate assumptions below.

Use the Fraction Calculator with Steps to keep the rates exact. The original worksheet here also applies to two machines processing interchangeable items when their outputs can be combined.

Convert each completion time into a work rate

Define one job as the same complete batch for both workers. A solo completion time of 6 hours means a rate of 1/6 of that job per hour. A solo time of 9 hours means 1/9 of the job per hour. Keep both times in hours before combining them.

Worker Time for the whole job alone Work completed per hour
A 6 hours 1/6 job
B 9 hours 1/9 job
A and B together Calculated below 1/6 + 1/9 = 5/18 job

This is the standard work-rate model: work completed equals rate multiplied by elapsed time. OpenStax explains the model in its section on work applications with rational equations. Our examples use a shared batch and a delayed start to make the timing explicit.

Example 1: both start at the same time

The combined rate is 1/6 + 1/9 = 5/18 job per hour. For one whole job, time is 1 ÷ (5/18) = 18/5 hours = 3.6 hours.

Convert the fractional hour into minutes: 0.6 × 60 = 36. The result is 3 hours 36 minutes. Decimal hours and hours-and-minutes use different notation; 3.6 hours does not mean 3 hours 6 minutes.

A useful check is to multiply the total rate by the proposed duration: (5/18) × (18/5) = 1 whole job. The combined duration is shorter than either solo completion time, as expected for independent workers adding positive output.

Example 2: B joins after A has worked for one hour

Split the timeline at the moment B arrives. During the first hour, A completes 1/6 of the job, leaving 1 − 1/6 = 5/6.

Once B joins, their combined rate is still 5/18 job per hour. The time needed for the remaining work is (5/6) ÷ (5/18) = 3 hours. Add the hour already elapsed: 1 + 3 = 4 hours from A’s start.

The 3-hour result answers “how long after B arrives?” The 4-hour result answers “how long from the beginning?” Label the starting point whenever you share the estimate. As an independent check, A’s first-hour output plus their joint output is 1/6 + 3 × 5/18 = 1 whole job.

Enter the worksheet in the calculator

The live fraction tool has four fields: first numerator, first denominator, second numerator and second denominator. Choose the operation, then select Calculate. Use each exact fraction result in the next row.

Purpose First fraction Operation Second fraction Exact result
Combined hourly rate 1/6 Add 1/9 5/18 job/hour
Whole-job duration 1/1 Divide 5/18 18/5 hours
Work after A’s first hour 1/1 Subtract 1/6 5/6 job remaining
Duration after B arrives 5/6 Divide 5/18 3 hours

The decimal approximation of 5/18 is displayed as 0.2778. Carry the exact 5/18 into the division so the rounded display does not alter a later result. For help with those operations, see our fraction addition and subtraction guide and fraction division guide.

Check the assumptions before using the estimate

  • Same workload: both solo times describe the same amount and quality of finished work.
  • Parallel work: both workers can contribute at once. A task that must pass through one worker and then the other needs a different timeline.
  • Steady output: the model excludes setup, breaks, rework, fatigue and shared-equipment bottlenecks unless you account for them separately.
  • Consistent units: convert minutes and hours before taking reciprocals. Keep each rate labelled as jobs per hour or jobs per minute.
  • Positive time remaining: if the job is already complete before the helper arrives, the helper does not change its finish time.

For your own worksheet, record the solo times, work completed before each staffing change, work remaining, and which workers are active in each interval. Recalculate at every change. Use observed rates where available and treat the answer as a planning estimate; adding a helper does not guarantee a particular real-world productivity gain.

Checked 14 November 2026: all four worksheet operations were entered into the live CheckMatter Fraction Calculator and checked independently. Written and maintained by Ajit Naskar. See our editorial policy; independent professional review is not claimed.