Skip to content
Home » Blog » Average Trip Speed: Unequal Distances and Stops Worked Example

Average Trip Speed: Unequal Distances and Stops Worked Example

An orange car follows a two-part route beside a clock and pause symbol, illustrating trip speed including a stop.
Choose the trip boundary first, then divide its total distance by the time elapsed within that boundary.

Average trip speed is total distance divided by total elapsed time. For a 90 km leg averaging 60 km/h followed by a 30 km leg averaging 40 km/h, the moving time is 2 hours 15 minutes and the average is 53.33 km/h, rounded to two decimal places. Add a 15-minute stop within the trip and the full-trip average becomes 48 km/h.

This guide shows the same example with exact fractions, so you can reproduce it in the Fraction Calculator with Steps. The segment speeds are hypothetical averages; the arithmetic does not predict traffic or future arrival times.

Define the distance and time you are averaging

Write the start and finish of the measurement on your worksheet. For a full-trip average, include the distance travelled and every minute elapsed between those two events, including a stop. A moving-only average uses moving time and should be labelled accordingly.

Average speed = total distance ÷ elapsed time. If you have a distance and an average speed for each leg, calculate that leg’s time first: time = distance ÷ speed. Add the leg times and any separate stop time before dividing the total distance by the result.

OpenStax defines average speed using total distance and elapsed time in its discussion of speed. The worksheet below is an original application of that definition. All distances use kilometres and all times used in the division are in hours.

Example: two legs with unequal distances

Leg Distance Assumed average speed Time
A 90 km 60 km/h 90/60 = 3/2 hours
B 30 km 40 km/h 30/40 = 3/4 hour
Total 120 km Calculated below 3/2 + 3/4 = 9/4 hours

The total moving time is 9/4 hours = 2.25 hours = 2 hours 15 minutes. Divide the 120 km total by that exact time:

120 ÷ (9/4) = 160/3 km/h = 53.333… km/h. Report 53.33 km/h if two decimal places suit your purpose. Keep the exact fraction during intermediate calculations.

A simple arithmetic mean of the two speeds would give each speed equal weight. Here the legs take different amounts of time, so that method does not represent the trip. The speeds must be weighted by their durations. Our weighted-average guide explains how a result changes when observations carry different weights.

Add a 15-minute stop within the trip

Convert the stop into the same time unit: 15/60 = 1/4 hour. The elapsed time becomes 9/4 + 1/4 = 5/2 hours, or 2 hours 30 minutes. The distance remains 120 km because the stop adds time without adding distance.

The full-trip average is therefore 120 ÷ (5/2) = 48 km/h. Both results describe this example correctly when labelled: 53.33 km/h while moving, and 48 km/h including the stop. If the supplied leg averages already include that stop, adding it again would count it twice.

Reproduce the exact calculator worksheet

Enter each pair of fractions into the calculator’s first and second numerator/denominator fields, select Add or Divide, then select Calculate. Represent a whole number with denominator 1. Carry the exact result into the next step.

Step First fraction Operation Second fraction Exact result
A’s time 90/1 Divide 60/1 3/2 hours
B’s time 30/1 Divide 40/1 3/4 hour
Moving time 3/2 Add 3/4 9/4 hours
Moving average 120/1 Divide 9/4 160/3 km/h
Stop in hours 15/1 Divide 60/1 1/4 hour
Elapsed time 9/4 Add 1/4 5/2 hours
Full-trip average 120/1 Divide 5/2 48 km/h

Check units, boundaries and assumptions

  • Use one distance unit. Convert kilometres and miles consistently before summing them. The Unit Converter can help standardise quantities.
  • Use one time unit. Minutes must be converted to hours when dividing kilometres to obtain km/h. Decimal hours use fractions of an hour; 2.25 hours means 2 hours 15 minutes.
  • Keep stop accounting consistent. Decide whether the start-to-finish interval includes breaks, queues and waiting. Avoid adding a delay already included in a segment’s recorded time.
  • Check the denominator. Elapsed time must be positive. For a known positive distance, a segment speed of zero cannot produce a finite travel time through distance divided by speed.
  • Check the scale. The moving-only average lies between the two positive segment averages. A stationary interval can reduce the full-trip average below either moving speed.

For an actual completed journey, measured distance and start/finish timestamps can be more useful than reconstructing the trip from assumed segment averages. Distance-based fuel planning is a separate calculation; see the trip fuel-cost guide if you also need that worksheet.

Checked 17 November 2026: all seven worksheet operations were entered in the live CheckMatter calculator and checked independently. Written and maintained by Ajit Naskar. See our editorial policy; independent professional review is not claimed.