Skip to content
Home » Blog » How to Calculate Percentage Increase and Decrease (With Real-World Examples)

How to Calculate Percentage Increase and Decrease (With Real-World Examples)

Percentage change = (new value − original value) ÷ original value × 100. Use the original value as the denominator. For a rise from 80 to 100, the change is 25%; going from 100 back to 80 is a 20% decrease because the starting value changed.

Calculate a change step by step

  1. Write down which number is the starting baseline.
  2. Subtract original from new to obtain the signed difference.
  3. Divide that difference by the original value and multiply by 100.
  4. Keep unrounded numbers through the calculation, then choose a sensible display precision.
Scenario Calculation Answer
$80 rises to $92 (92 − 80) ÷ 80 × 100 15% increase
1,250 users fall to 1,100 (1100 − 1250) ÷ 1250 × 100 −12%, a 12% decrease
100 falls to 50 (50 − 100) ÷ 100 × 100 50% decrease
50 returns to 100 (100 − 50) ÷ 50 × 100 100% increase

Match the calculator mode to the question

Open the Percentage Calculator and choose the percentage-change mode. Enter the starting value first and the new value second; compare 80 → 100 with 100 → 80. A mode that asks “What is X% of Y?” calculates a portion of an amount instead of a change between amounts.

Percentage points answer another question

If a rate moves from 3.2% to 4.0%, the gap is 0.8 percentage points. Relative to 3.2, the increase is 0.8 ÷ 3.2 × 100 = 25%. Calling it a 0.8% relative increase would describe a different change. For another worked comparison, see percentage points versus percentage change.

Handle zero and negative baselines explicitly

From 0 to 10, division by the starting zero is undefined; there is no finite percentage-change result. Say “an increase of 10 units” rather than inventing a percentage. From 10 to 0, the positive baseline makes the ordinary result a 100% decrease.

A negative baseline can produce a mathematically signed ratio that reads counterintuitively as growth or decline. State the actual amounts and sign convention first. For example, a loss changing from −20 to −10 is a 10-unit improvement; do not hide that meaning behind an unexplained ratio.

Reverse a change with division

If a price rose 20% to reach 120, the original is 120 ÷ 1.20 = 100. If it fell 20% to reach 80, the original is 80 ÷ 0.80 = 100. Subtracting or adding 20% of the final number does not undo the original operation. A 100% reduction leaves zero and cannot be uniquely reversed from the final value alone.

Successive changes multiply

Starting with 100, a 20% reduction leaves 80; a second 10% reduction leaves 72. The combined decrease is 28%, not 30%. Use the Discount Calculator for the two-discount workflow or the stacking-discounts guide for caps, exclusions and flat coupons.

For any report, retain the baseline, new value, units, time period and rounding precision. A percentage without its denominator is difficult for another reader to verify.

Examples and instructions revised November 2, 2026. Report a correction.